PyQt6 build failure
Phil Thompson
phil at riverbankcomputing.com
Wed Jan 6 09:57:40 GMT 2021
On 05/01/2021 22:00, Antonio Rojas wrote:
> Hi,
> I'm getting this error when building PyQt6 from source. Any ideas?
>
> /build/pyqt6/src/PyQt6-6.0.0/sip/QtQuick/qsggeometry.sip: In function
> ‘void* init_type_QSGGeometry_AttributeSet(sipSimpleWrapper*,
> PyObject*, PyObject*, PyObject**, PyObject**, PyObject**)’:
> /build/pyqt6/src/PyQt6-6.0.0/sip/QtQuick/qsggeometry.sip:128:30:
> error: ‘GL_BYTE’ was not declared in this scope
> 128 | case GL_BYTE:
> | ^~~~~~~
> /build/pyqt6/src/PyQt6-6.0.0/sip/QtQuick/qsggeometry.sip:138:30:
> error: ‘GL_FLOAT’ was not declared in this scope
> 138 | case GL_FLOAT:
> | ^~~~~~~~
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1045:42:
> error: ‘GL_POINTS’ was not declared in this scope
> 1045 | {SIP_NULLPTR, SIP_NULLPTR, SIP_NULLPTR, SIP_NULLPTR,
> intInstances_QSGGeometry, SIP_NULLPTR, SIP_NULLPTR, SIP_NULLPTR,
> SIP_NULLPTR, SIP_NULLPTR},
> | ^~~~~~~~~
> /build/pyqt6/src/PyQt6-6.0.0/sip/QtQuick/qsggeometry.sip:142:30:
> error: ‘GL_INT’ was not declared in this scope
> 142 | case GL_INT:
> | ^~~~~~
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1046:41:
> error: ‘GL_LINES’ was not declared in this scope
> 1046 | },
> | ^
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1047:45:
> error: ‘GL_LINE_LOOP’ was not declared in this scope
> 1047 | doc_QSGGeometry,
> | ^
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1048:46:
> error: ‘GL_LINE_STRIP’ was not declared in this scope
> 1048 | -1,
> | ^
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1049:45:
> error: ‘GL_TRIANGLES’ was not declared in this scope
> 1049 | -1,
> | ^
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1050:50:
> error: ‘GL_TRIANGLE_STRIP’ was not declared in this scope; did you
> mean ‘sipName_GL_TRIANGLE_STRIP’?
> 1050 | SIP_NULLPTR,
> | ^
> |
> sipName_GL_TRIANGLE_STRIP
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1051:48:
> error: ‘GL_TRIANGLE_FAN’ was not declared in this scope; did you mean
> ‘sipName_GL_TRIANGLE_FAN’?
> 1051 | SIP_NULLPTR,
> | ^
> |
> sipName_GL_TRIANGLE_FAN
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1052:40:
> error: ‘GL_BYTE’ was not declared in this scope
> 1052 | init_type_QSGGeometry,
> | ^
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1053:41:
> error: ‘GL_FLOAT’ was not declared in this scope
> 1053 | SIP_NULLPTR,
> | ^
> /build/pyqt6/src/PyQt6-6.0.0/build/QtQuick/sipQtQuickQSGGeometry.cpp:1054:39:
> error: ‘GL_INT’ was not declared in this scope
> 1054 | SIP_NULLPTR,
> | ^
Try the next snapshot.
Thanks,
Phil
More information about the PyQt
mailing list